No one enjoys cleaning their bathtub, but it’s a necessary task that must be done from time to time. Unfortunately, many people don’t know the best way to clean their bathtub, which can lead to a lot of frustration and wasted time.
In this blog post, we will share our top tips for how to clean a disgusting bathtub quickly and easily. Read on for more information!
Table of Contents
What To Get Before You Start
Before you get started on the filth and grime, you’ll need the following tools:
- Cleaning gloves for the household use
- Respirator or face mask
- Glasses for safety
- Soda
- Vinegar (white)
- Juice of lemon
- Dish detergent
- Microfiber cloth with bleach
- Sponge
- Scrubbing brush
- Cleaner for toilet bowls
- Bottle of spray
- Bucket
It’s a good idea to put on your rubber gloves and safety eyewear before you start cleaning. To protect your lungs, wear a mask or respirator when using bleach and run the bathroom fan.
How To Clean A Disgusting Bathtub
Acrylic
The sheen of acrylic tubs can be dulled by harsh cleaning. Fortunately, there is a remedy: a combination of dish soap, baking soda, and lemon juice. Baking soda acts as a binder, breaking up the soap scum.
- Mix baking soda and dish soap in a 1:1 ratio and add a few drops of lemon juice.
- Mix until the mixture gets frothy.
- Coat the tub with the solution and set it aside for 30 minutes.
- Clean the tub from top to bottom with a damp sponge, allowing unclean water to drain into the tub.
- Rinse the tub well with water.
Porcelain Or Fiberglass
Vinegar is a good disinfectant and cleaner for the home. It cleans unclean porcelain and fiberglass tubs well, but it might be too abrasive for an acrylic tub.
- In a spray bottle, combine water and vinegar. For fiberglass tubs, use a 2:1 water-to-vinegar ratio and for porcelain tubs, use a 1:1 water-to-vinegar ratio. Add a teaspoon of lemon juice for fragrance and additional cleaning power.
- Spray the entire tub with the solution and let it sit for 15 to 20 minutes on the surface.
- Scrub the tub’s surface lightly with a moist cloth or sponge. Begin at the top and work your way down to enable loosened grit and soap scum to flow into and drain out of the tub as you work.
- If the tub is highly soiled, soak it for 30 minutes to an hour in a solution of 12 to 1-gallon vinegar, hot water, and a cup or two of baking soda. Drain the tub and clean the spots with a sponge. Repeat as needed.
With Bleach
If the tub you’re cleaning is really dirty, you may need to use bleach to boost your cleaning efforts. When working with bleach, remember to use a face mask or respirator, safety glasses, and gloves.
Furthermore, several acrylic tub manufacturers advise against using bleach in their tubs, claiming that it will violate the guarantee. Bleach will not harm fiberglass or white porcelain.
- Add 1/2 cup bleach to a gallon of water.
- Coat the tub’s surface with the bleach and water solution with a sponge and wait 5 minutes.
- Scrub the area with the sponge after 5 minutes, paying specific attention to the harder stains.
- Rinse the tub well with cold water, taking care not to spray the bleach.
Mold And Mildew
Mold and mildew can be difficult to eradicate, but here’s a tip: Use a bleach-based gel toilet bowl cleaner. These products’ gels attach to the mold and break it down.
- Using a squirt bottle, apply toilet bowl cleaning to the moldy and mildewed region.
- For mold in a tub surrounding corner, squeeze the gel into the corner and cover it with a paper towel to form a dam.
- Allow the gel to rest on the surface so that the bleach may penetrate the mold and mildew. While this normally takes approximately an hour, very moldy surfaces may need to be treated overnight.
- Scrub the tub from top to bottom with a scrub brush once the gel has had a chance to penetrate into the mold and mildew.
- Rinse well with cold water, taking care not to spray the bleach.
Those cleaning suggestions should assist you in restoring the bright, smooth finish of your bathtub. With the appropriate formula and a little elbow effort, your bathtub may once again be the focal point of your bathroom.
Tips On How To Clean A Disgusting Bathtub
The bathtub is one of the most used fixtures in any home, and it can quickly become a breeding ground for bacteria and grime.
If you don’t clean your tub on a regular basis, you may be exposing yourself and your family to harmful germs. But with a little effort, you can keep your tub clean and fresh. Here are some tips on how to clean a disgusting bathtub:
- Start by removing any non-slip mats or other objects from the tub. These can harbor dirt and bacteria.
- Fill the tub with very hot water, as hot as you can stand it. Add a cup of bleach or another disinfectant and allow the tub to soak for at least 15 minutes.
- Use a stiff brush to scrub the sides and bottom of the tub, paying special attention to any stains or dirty areas. Rinse the tub thoroughly with hot water.
- Once a week, give your tub a thorough cleaning with a product specifically designed for bathrooms. Follow the instructions on the label carefully.
By following these simple tips, you can keep your bathtub clean and fresh all year long.
FAQs Related To How To Clean A Disgusting Bathtub
Why Is My Bathtub So Dirty?
There are a few reasons your bathtub might be dirtier than you’d like.
- First, if you have hard water, the minerals in the water can leave behind a film on the tub.
- Second, soap can also build up on the surface of the tub, especially if you use body wash or shampoo.
- Third, mold and mildew can grow in damp, humid environments, and bathtubs provide the perfect conditions for mold to thrive.
- Finally, if you don’t regularly clean your tub, dirt and grime can accumulate over time.
To prevent your tub from getting dirty, start by using a quality shower head filter to remove minerals from the water. Then, use soap sparingly and always rinse the tub after each use.
Be sure to clean the tub regularly with a mild cleanser and allow it to air dry completely to discourage mold growth. By taking these simple steps, you can keep your bathtub clean and fresh all year long.
Can Bleach Damage A Bathtub?
Many people believe that bleach is an effective way to clean and disinfect their bathtubs. However, bleach can actually damage your tub and shorten its lifespan.
Bleach is a harsh chemical that can etch the surface of your tub, making it more susceptible to staining. Additionally, bleach can erode the grout between tiles, eventually causing the tiles to come loose. If you do use bleach to clean your tub, be sure to rinse it thoroughly afterward to remove any residue.
You may also want to consider using a less harsh cleaning solution, such as vinegar or baking soda. These products are just as effective at cleaning and disinfecting, but won’t damage your tub in the process.
How Often Should I Clean My Bathtub?
Bathtubs see a lot of use, and over time they can become stained and grimy. To keep your tub looking its best, it’s important to clean it on a regular basis. But how often should you clean your tub?
The answer may depend on the type of tub you have and how often you use it. For example, if you have a porcelain tub that is used daily, you’ll probably want to give it a good scrubbing once a week.
However, if you have a fiberglass tub that is only used occasionally, once a month may be sufficient. In general, it’s a good idea to give your tub a thorough cleaning at least once every two weeks. By following these guidelines, you can help keep your bathtub looking new for years to come.
Conclusion On How To Clean A Disgusting Bathtub
While this process may seem daunting, it is important to remember that with a little elbow grease, your bathtub can be restored to its former glory.
By following the steps we have outlined in this article, you can clean your bathtub and get rid of all of the dirt, grime, and gunk that has built up over time. So don’t wait any longer – start cleaning today!
Thanks for reading our guide on how to clean a disgusting bathtub. We hope you found it helpful. If you have any questions or comments, feel free to leave them in the section below.
Read More: